Serial Number; Exporting The Serial Number To The Sd Card; Locating The Transmitter Airware Software Version; Calibrate - Spektrum DX8G2 Bedienungsanleitung

EN
SYSTEM SETUP

Serial Number


The Serial Number screen displays the transmitter serial number
and AirWare software version.

Exporting the Serial Number to the SD Card


You may find it helpful to export the transmitter serial number to a
text file for your personal records or when you are registering the
transmitter on the Spektrum Community.
To export the transmitter serial number:
1. Insert an SD Card in the card slot on the transmitter.
2. Scroll to EXPORT and press the scroll wheel. The SD Status
screen appears and should display MY_DX8.xml in the middle
of the screen.
3. Press the scroll wheel again to return to the Serial Number
screen.
4. Power off the transmitter and remove the SD Card from the
transmitter.

Locating the Transmitter AirWare Software Version


The transmitter AirWare software version appears between PREV
and NEXT at the bottom of the Serial Number screen. Register
your DX8 to get AirWare software updates and other news at
spektrumrc.com

Calibrate


The Calibration screen stores the potentiometer endpoints for all
proportional controls. It is mandatory to complete the calibration
after changing the stick mode selection.
Calibrating the Transmitter
1. Carefully move the gimbal sticks in a + shape moving from left
to right, then up and down. Press gently on the gimbals at the
stops to achieve an accurate calibration. Return both gimbal
sticks to the center position.
2. Select SAVE to store the calibration.
28
All manuals and user guides at all-guides.com
Reference the Serial Number screen any time you need to register
your transmitter or update the AirWare software from the Spektrum
Community website.
5. Install the SD Card in a card reader connected to your
computer.
6. Open the MY_DX8.xml file from the SD Card location. You
can then copy and paste the serial number into your personal
records or to the Spektrum Community website.
IMPORTANT: AirWare files are specific to the transmitter
serial number and you cannot transfer AirWare files between
transmitters, ie., downloading an AirWare software update once
and attempting to install it on multiple transmitters.
SPEKTRUM DX8G2 • TRANSMITTER INSTRUCTION MANUAL