Power Adaptor - Num'axes PIE1052 Gebrauchsanleitung

Figure 3
External power port
Figure 4
ON / SETUP / OFF
switch
3. Power supply
3.1. Batteries
The camera runs on 12 AA size batteries. The product can work with alkaline or Ni-MH rechargeable batteries.
You can purchase alkaline or Ni-MH AA batteries at any time on www.numaxes.com.
Please select the battery type you're using in the menu option "Battery type" to reach longer operation time.
Before inserting or removing the batteries, the camera must be turned off (switch in the OFF position).
When inserting the batteries, make sure to follow polarity indicated inside the battery slot. Upside down batteries may
cause device malfunction.
NOTE: Don't mix battery types (alkaline and Ni-MH)! This may cause permanent damage not covered by the guarantee.
3.2. Solar panel
This camera is able to work with a solar panel with build-in lithium battery (12V/2A).
You can purchase a 12V solar panel at any time on www.numaxes.com.
However, the solar panel can't charge rechargeable AA Ni-MH batteries inserted in the battery slots as these batteries
need higher voltage for charging.

3.3. Power adaptor

This camera can also be powered by an external DC adapter (12V/2A).
You can purchase a 12V external DC adapter at any time on www.numaxes.com.
We recommend removing the batteries when a power adapter is used. DC power is recommended if the camera is used
for security purposes.
18/72
USB port
Guide d'utilisation PIE1052 – indice B – Janvier 2022
MENU button
Navigation buttons
 /  /  / 
OK button