Slideshow - auna Silver Star Swing Bedienungsanleitung

EN
54
• Available stations change from time to time
• If reception was not good for the original scan (for example the antenna
was not up), this may result in an empty or incomplete list of available
stations.
• If you have poor reception of some stations (burbling), you may wish to
list only stations with good signal strength.
A question mark before a station in a list indicates that station is currently
unavailable. Depending on the cause of the loss of signal this may be only
temporary. Stations that unlikely to be available again (for example you
have moved out of the broadcast range of a station), can be removed from
the station list.
Scan for stations
To start a scan manually, select Menu > Scan. Once the scan is complete,
the radio shows a list of available stations. The manual tune menu option
allows the user to select a particular channel and display the signal strength
for that channel.
Remove stations from list
To remove stations that a listed but unavailable, select Menu > Prune
invalid.
Selecting stations
To listen to or change a station, select Menu > Station List and press
OK remote. Scroll remote control to select station you want to listen to.
Stations listed with a '?' question mark in front of them are not available.
Once selected, the station plays and the screen shows 'playing' information
about the station, track or show broadcast by the station. Alternatively,
pressing either the left and right keys, jumps to the next station up or down
in the station list. Preset stations can be stored and recalled as described in
above section 'Presets'.
Now playing information
While the stream is playing, the screen shows its name and DLS (Dynamic
Label segment) information broadcast by the station giving real-time
information such as programme name, track title and contact details.
Stereo broadcasts are indicated with an icon at the top of the screen. To
view further information, press Info. Each time you press Info, another
set of information is displayed, cycling through DLS text, programe type,
ensemble name/frequency, signal strength/error rate, bit rate/codec/
channels, today's date and DL Plus (if available).

Slideshow

When slideshow is available (dependent on the broadcasted signal), the
images are displayed on the left side of the screen. To cycle through the