Installation - IFM Electronic efector180 IX5010 Bedienungsanleitung

All manuals and user guides at all-guides.com

2 Installation

Place the sensor (1) on the valve
spindle (2) until the limit stop in a
suitable fixture / adapter (3).
Fix the sensor to the 3-hole flange
(5) by means of the included fixing
screws (6).
The sensor (1) must either be
integrated into a valve top or
correctly fitted to the actuator (4)
by means of a suitable adapter (3).
If necessary, adapt the length of the
valve spindle to the measuring
range.
20