Inhaltsverzeichnis
Werbung
4.8.2 CONSOLE CMD ANS3100RM/ANS3000RM
Command
logout
quit
back
help
help all
clock
clock ntp enabled set
clock ntp enabled show
clock timezone set
{minutes}
clock timezone show
clock dst enabled set
clock dst enabled show
clock manual set
„{hh:mm:ss yyyy-
mm-dd}"
clock show
clock ntp server
{PRIMARY=0|BACKUP=1} set„{dns_name}"
clock ntp server
{PRIMARY=0|BACKUP=1} show
console
console version
console telnet enabled set
{OFF=0|ON=1}
console telnet enabled show
console telnet port set
console telnet port show
console telnet raw set
console telnet raw show
console telnet echo set
console telnet echo show
console telnet activeneg set
{OFF=0|ON=1}
console telnet activeneg show
console telnet login set
console telnet login show
61
KESS Power Solutions GmbH / www.kess.at / info@kess.at
Description
go to login prompt when enabled
quits telnet session - nothing in serial console
back one cmd level
show all cmds from this level
show all cmds
enters cmd group „clock"
enables ntp
{OFF=0|ON=1}
shows if ntp enabled
sets timezone
shows timezone
enables dst
{OFF=0|ON=1}
shows if dst is enabled
sets time and date manually
shows actual time and date
sets ntp server name
shows ntp server name
enters cmd group „console"
shows unique console version number
enables telnet on/off
shows if telnet enabled
sets telnet port
{ip_port}
shows telnet port
sets raw mode (disables editing) on/off
{OFF=0|ON=1}
shows if raw mode enabled
enables echo on/off
{OFF=0|ON=1}
shows if echo enabled
enables telnet active negotiation (IAC) on/off
shows if active negotiation enabled
enables login on/off
{OFF=0|ON=1}
shows if login enabled
Note
2
2
2
2
2
Werbung
Inhaltsverzeichnis
