Ergänzende Dokumente; Konformitätserklärung - ABB ACS880-01 Kurzanleitung Für Installation Und Betrieb

Kennzeichnungen
Die Kennzeichen sind auf dem Typenschild des Frequenzumrichters angegeben.
CE UL
Ergänzende Dokumente
Dokument
ACS880-01 hardware manual
ACS880 primary control program firmware manual
ACx-AP-x assistant control panels user's manual
Drive composer PC tool user's manual
Converter module capacitor reforming instructions
Common mode filter kit for ACS880-01 frame R6 (option +E208) installation
instructions
Common mode filter kit for ACS880-01 frame R7, and for ACS880-11,
ACS880-31, ACH580-31 and ACQ580-31 frame R8 installation instructions
Common mode filter kit for ACS880-01 frame R8 (option +E208) installation
instructions
Common mode filter kit for ACS880-01 drives (frame R9, option +E208)
installation instructions
Konformitätserklärung
RCM EAC Grünes EIP-
Kennzeichen
WEEE TÜV Nord
Code (Englisch)
3AUA0000078093
3AUA0000085967
3AUA0000085685
3AUA0000094606
3BFE64059629
3AXD50000015178
3AXD50000015179
3AXD50000015180
3AXD50000015201
Declaration of Conformity
Supply of Machinery (Safety) Regulations 2008
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
We
Manufacturer: ABB Oy
Address: Hiomotie 13, 00380 Helsinki, Finland.
Phone: +358 10 22 11
declare under our sole responsibility that the following products:
Frequency converters
ACS880-01/-11/-31
ACS880-04/-04F/-M04/-14/-34
with regard to the safety functions
- Safe Torque Off
- Safe stop 1, Safe stop emergency, Safely-limited speed, Safe maximum speed, Safe brake control, Prevention of unexpected start-up
(with FSO-12 option module, +Q973, encoderless)
- Safe stop 1, Safe stop emergency, Safely-limited speed, Safe maximum speed, Safe brake control, Safe speed monitor, Safe direction,
Prevention of unexpected start-up (with FSO-21 and FSE-31 option modules, +Q972 and +L521, encoder supported)
- Safe motor temperature (with FPTC-01 thermistor protection module, +L536)
- Safe stop 1 (SS1-t, with FSPS-21 PROFIsafe module, +Q986)
are in conformity with all the relevant safety component requirements of the Supply of Machinery (Safety) Regulations 2008, when the listed
safety functions are used for safety component functionality.
The following harmonized standards have been applied:
EN 61800-5-2:2007 Adjustable speed electrical power drive systems – Part 5-2: Safety requirements -
Functional
EN 62061:2005 Safety of machinery – Functional safety of safety-related electrical, electronic and
+ AC:2010 + A1:2013 + A2:2015 programmable electronic control systems
EN ISO 13849-1:2015 Safety of machinery – Safety-related parts of control systems. Part 1: General
requirements
EN ISO 13849-2:2012 Safety of machinery – Safety-related parts of the control systems. Part 2:
Validation
EN 60204-1:2018 Safety of machinery – Electrical equipment of machines – Part 1: General
requirements
The following other standards have been applied:
IEC 61508:2010, parts 1-2 Functional safety of electrical / electronic / programmable electronic safety-
related systems
IEC 61800-5-2:2016 Adjustable speed electrical power drive systems – Part 5-2: Safety requirements -
Functional
The product(s) referred in this declaration of conformity fulfil(s) the relevant provisions of other UK statutory requirements, which are notified in
a single declaration of conformity 3AXD10001326405.
Authorized to compile the technical file: ABB Limited, Daresbury Park, Cheshire, United Kingdom, WA4 4BT.
Helsinki, May 7, 2021
Signed for and on behalf of:
Tuomo Tarula Aaron D. Wade
Local Division Manager, ABB Oy Product Unit Manager, ABB Oy
Document number 3AXD10001329538
Page 1 of 1
16
CSA UKCA
Code (Deutsh)
3AUA0000103702
3AUA0000111128
3AXD50000028267
3AUA0000044714
xxxxxxxxxxxxxxxxxxxxxxxxxxx