Gens Ace Imars III Pro Bedienungsanleitung Seite 19

3、SYSTEM SETTING
3.1 Working capacity setting
Remarks: After setting the Capacity Cut-Off, the charger will automatically stop when Capacity Cut-Off value is
reached.
The charger will read: CHARGE DONE! Capacity xxxxx
Press Enter/Start
button
Press+ button
Press- butto
Press+ button
Press- butto
Press+ button
Press- butto
Press+ button
Press- butto
Press- button
Press Enter/Start
button
Press Enter/Start
button
Press Enter/Start
button
Press Enter/Start
button
From the main charge menu press the "+/-" button to
switch to "FUNCTION SELECT SYSTEM SET" position;
Press the "Enter/Start" button to enter the system
settings interface and press "Back/Stop" button to return
to the "PROGRAM SELECT SYSTEM SET" position;
Press the +/- button to switch between different system
setup options, including:
SAFETY TIMER
VERSION
Test mode
Sound Menu
Capacity Cut-off
From the main charge menu press the "+/-" button to
switch to the "PROGRAM SELECT SYSTEM SET"
position.
Press the "Enter/Start" button to enter the system
setting interface, press the "+/-" button to switch to
the "Capacity Cut-Off" position;
Press the "Enter/Start" button, the cursor on the left
side of the interface will flash, press the "+/-" button
to modify the current status;
(OFF: Turn off the working capacity function, ON:
Turn on the working capacity function)
Press the "Enter/Start" button, the cursor on the right
side of the interface will flash, press the "+/ -" button
to modify the capacity.
(Capacity modification range: "100~99999mAh")
Press the "Enter/Start" button, the set up is
completed
Gens Ace ImarsIII
19