Revolution 975367 Gebrauchsanweisung Seite 17

GROUNDING INSTALLATION
This is a class I appliance. This appliance must be
grounded. In the event of an electrical short cir-
cuit, grounding reduces the risk of electric shock
by providing an escape wire for the electric cur-
PRIOR TO START-UP
• Make sure the applience is undamaged. In case
of any damage, immediately contact your supplier
DO NOT use the appliance.
• Remove the entire packaging and protecting foil
(if applicable).
• Clean the appliance with lukewarm water and a soft
cloth.
FUNCTIONS AND DESIGN OF THE VACUUM PACKAGING MACHINE
Quick Start button
Quick Seal button
Foam gasket strip
Vacuum chamber
gasket
Vacuum
chamber plate
rent. This appliance is equipped with a cord having
a grounding wire with a grounding plug. The plug
must be plugged into an outlet that is properly in-
stalled and grounded.
• Position the appliance on a flat and stable sur-
face, unless recommended otherwise.
• Provide suffiecient space around the appliance to
ensure ventilation.
• Position the appliance appropriately to ensure
good access to the plug at all times.
• Note: Vacuum bag roll is not included.
Handle
Sealing bar
Control
panel
Power cord
connector
Vacuum cord
connector
Lid
EN
17