Technical Data - Jung Pumpen PENTAIR COMPLI 1535/2 B2 HL Originalbetriebsanleitung

ENGLISH
Weight
Protection category
Operating voltage
Power consumption of control unit
Control fuse
Fuse alternating current output
High water alarm emergency supply (optional)
Terminals
Motor protection
Monitoring of rotational field / phase failure
Temperature range in operation
Temperature range in storage
Air humidity
Compli potentiometer
Level switch, input
High water alarm, input
Powered alarm relay
Potential-free alarm relay
Method used for measuring current
Current transformer
24

TECHNICAL DATA

depending on type 4-6 kg
IP 44
3/N/PE x 400 V, 50 Hz
approx. 8 W
F1 fine-wire fuse 5x20 mm, 6.3 A T/MT; EN 60127-2-5, DIN 41571-2
F2 fine-wire fuse 5x20 mm, 2.0 A T/MT; EN 60127-2-5, DIN 41571-2
9 V NiMH rechargeable batteries
2.5 mm² push-in terminals on the PCB
4 mm² push-in terminals on top hat rail
Screw terminals 4 mm² at the motor protection relay/motor contactor
Screw terminal 6/10 mm² for potential equalisation
Motor protection switch on top hat rail / motor protection relay on
contactor
Error message given for anti-clockwise rotating field and if there is a
power phase failure
-20 ... 50°C
-20 ... 70°C
0 to 90% RH, with no condensation
5 kOhm
24 V, 4 mA
12 V, 7 mA
230 V AC, max 2 A (AC1)
5A, 250 V AC
via current transformer and A/D converter
0 - 20 A, ± 10%