Measurement Parameter - Altana BYK spectro2go Kurzbedienungsanleitung

spectro2guide Pro

4 Measurement Parameter

Go to Configuration > Measurement parameter.
Color system
Select color system.
Default is CIE L*a*b*.
Color equation
Select color equation.
Default is ΔE*.
Color indices
Select color indices.
Default is none.
Gloss
Turn gloss measurement on or off.
Geometry
Select Specular Included/Excluded
mode. Default is Spin. Only available
for geometry d:8° (cat. no. 7070 and
7086).
Use gloss for movement detection
An error message appears if instrument is moved during measurement. De-
fault is activated. If message appears without movements, deactivate this op-
tion - e.g. when measuring very thin foils.
For additional parameter see
Measurement
8
"Fluorescence Measurement
[} 13]".
BYK-Gardner GmbH
Illumination
Select standard illuminant.
Default is D65.
Observer
Select standard observer.
Default is 10°.
Statistics
No. of readings to be taken per
sample. Statistics are evaluated, if
n > 1.
Always use autostandard
Search for nearest standard is always
active.
Always continue last test series
No new test series is created; latest
series is opened automatically.
[} 12]" and
295 025 088 - 2106
"Jetness