Beem ESPRESSO-CLASSICO Gebrauchsanleitung Seite 27

25
• Be careful when removing the portafi lter after operating the device. There may still be hot
water remaining in / on the portafi lter!
• Allow the portafi lter to cool down before it is emptied.
• Never pour water into the water tank when the device is switched on or during the
brewing process. Allow the device to cool down before fi lling it again.
• Do not move the device during the brewing process.
• In the interest of your own safety, inspect the device and the connecting cable for damage
each time before you use it. Use the device only if it is in working order.
• Make sure that the connecting cable does not present a trip hazard. The connecting cable
should not hang down from the surface on which the device is placed in order to prevent the
device from being pulled down.
WARNING – Danger of Fire
• Do not connect the device along with other consumers (with a high wattage) to a multiple
socket in order to prevent overloading and a possible short circuit (fi re).
• Do not operate the device in the vicinity of combustible materials. Do not place any combus-
tible materials (e.g. cardboard, paper, wood or plastic) in or on the device.
• Do not cover the device during operation.
NOTICE – Risk of Damage to Material and Property
• The device should only be used if it has been correctly assembled! Before each use, check
whether a sieve and the portafi lter are inserted correctly and whether the water tank and if
applicable the milk tank are fi lled correctly!
• Switch off the device and pull the mains plug out of the plug socket if an error occurs during
operation, when there is a power cut or before a thunderstorm.
• When you pull it out of the plug socket, always pull on the mains plug and never the mains
cable!
• Never pull or carry the device by the connecting cable.
• Protect the device from other heat sources, naked fl ames, sub-zero temperatures, persistent
moisture, wet conditions and impacts.
• Use only original accessories from the manufacturer in order to guarantee that there is no
interference that may prevent the device from working and to avoid possible damage.
07440_Inlay_DE-EN-FR-ES-IT_A5_V1.indb 25 07440_Inlay_DE-EN-FR-ES-IT_A5_V1.indb 25
EN
21.06.2021 10:50:09 21.06.2021 10:50:09