Herunterladen Diese Seite drucken

Cleaning - Clatronic MWG 776 H Bedienungsanleitung, Garantie

Mikrowellengerät mit grill und heissluft
Vorschau ausblenden Andere Handbücher für MWG 776 H:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 5
Example: Proceed as follows for automatically starting the micro-
wave:
1. Press the MICROWAVE button once/repeatedly to select the
desired microwave power setting.
2. Press the START/+30SEC./CONFIRM button to confirm your
settings.
3. Use the turning knob to set the desired cooking time.
4. Press the CLOCK/PRE-SET button. A signal tone sounds and
the display will show the current time, with the first digit flashing.
5. Use the turning knob to set the hour of the desired start time.
6. Press the CLOCK/PRE-SET button. A signal tone sounds and
the minutes will be flashing on the display.
7. Use the turning knob to set the minutes of the desired start time.
8. Press the START/+30SEC./CONFIRM button to confirm. The
delimiter symbol ":"of the digital clock on the display stops flashing.
Example: 7:30 minutes cooking time at 100% power;
start time 14:20 o'clock
Step
Button
1
MICROWAVE
START/+30SEC./
2
CONFIRM
3
4
CLOCK/PRE-SET
5
6
CLOCK/PRE-SET
7
START/+30SEC./
8
CONFIRM
Note:
During this programmed setting the functions of the controls
are blocked (except: CLOCK/PRE-SET and STOP/CLEAR).
If you wish to display the start time again, press the CLOCK/
PRE-SET button.
When the pre-set time has been reached, the microwave will
start operation. Two signal tones will indicate the start.
Warning: Risk of fire!
Always supervise the device during operation.
When using the time-delay function, set the time in such a
way that the device will be operating under proper supervi-
sion.
Do not operate the microwave empty.
If you take the food earlier from the device, you will have to
terminate the function by pressing the STOP/CLEAR button.
After the time has elapsed the device will turn off and 5 signal tones
will sound. Take the food from the device.
82
All manuals and user guides at all-guides.com
Display
P100
(Power setting)
7:30
(Cooking time)
10:45
(Current time)
14:45
(Set hour)
14:45
14:20
(Set minutes)
10:45
(Current time)
Locking (Child-proof lock)
Press and hold the STOP/CLEAR button for more than 3 seconds
to lock the device. The display will show the locked setting. The
functions of the controls are blocked. Press and hold the STOP/
CLEAR button again for more than 3 seconds to unlock.
Display function
• When pressing the MICROWAVE, GRILL/COMBI. or CON-
VECTION buttons during microwave, grill, convection or combi
operation, the display will be showing the current power or
temperature settings for 2-3 seconds.
• In disregard to the operation mode, the display will be showing
the current time for 2-3 seconds when pressing the CLOCK/
PRE-SET button.
• During time-delay mode, press the CLOCK/PRE-SET button to
display the start time.

Cleaning

Turn the microwave off and disconnect the plug.
Interior
• Keep the interior of the microwave clean. Use a damp cloth to
remove splashing and spilling on the walls of the microwave. If
the device is very dirty, you may also use a mild detergent. Do
not use aggressive detergents.
• Use a damp cloth to wipe the viewing window inside and
outside, and regularly remove splashing and spots caused by
spilled liquids.
Exterior
• Clean the exterior walls of the enclosure with a damp cloth only.
Make sure no water enters the openings in the enclosure and
therefore the inside of the device.
• Use a damp cloth to clean the switches. When cleaning the
function switches, first open the door in order to avoid acciden-
tally switching on the device.
Accessories
• Clean the glass tray occasionally with dish detergent or in the
dishwasher.
• Regularly clean the guide ring and the inside of the bottom. You
may remove the guide ring and manually clean it. Use a mild
detergent or glass cleaner. Dry thoroughly. Make sure to position
the ring properly afterwards.
Odor
• In order to remove unpleasant odor in the microwave, place
a bowl suitable for microwave use filled with water and lemon
juice in the device and heat for approx. 5 minutes. Then wipe the
oven with a soft cloth.
Oven lights
• Please contact a service center for replacing the oven lights.

Quicklinks ausblenden:

Werbung

Fehlerbehebung

loading