Special Functions; Cleaning - Clatronic MWG 779 H Bedienungsanleitung

1. Select the 1st function: Press the W.T./TIME DEFROST button once
or twice.
2. Set the weight or the required time using the knob.
3. Select the 2nd function: Press the MICROWAVE button once/re-
peatedly to select the desired microwave power setting.
4. Press the START/+30SEC./CONFIRM button to confirm your
settings.
5. Use the turning knob to set the desired cooking time between
5 seconds and 95 minutes.
6. Select the 3rd function: Select the required grill mode by pressing
the DOUBLE GRILL/COMBI button once or repeatedly.
7. Press the START/+30SEC./CONFIRM button to confirm your
settings.
8. Use the turning knob to set the desired cooking time between
5 seconds and 95 minutes.
9. Press the START/+30SEC./CONFIRM button to start operation.
NOTE:
• The change of program is indicated by an acoustic signal.
• When grilling, several signal sounds will alert you to turn food such
as meat or sausages after half of the time has elapsed.
• The auto functions and the convection mode with pre-heating may
not be used for gradual cooking.

Special Functions

Auto start
You may delay the start of microwave, grill, convection, auto functions or
even of a combi setting. The maximum time-delay is 23 hours and
59 minutes.
NOTE:
• First set the clock! Otherwise you may not use this function.
• When using auto start, the defrost function is not available.
Example: It is 10:45 o'clock. You would like to program the microwave
in order to start cooking at 14:20 o'clock with highest power
setting for 7½ minutes.
Proceed as follows for automatically starting the microwave:
Step Button
1 MICROWAVE
START/+30SEC./
2
CONFIRM
3
4 CLOCK/PRE-SET
5
6 CLOCK/PRE-SET
7
START/+30SEC./
8
CONFIRM
NOTE:
• During this programmed setting the functions of the controls are
blocked (except: CLOCK/PRE-SET and STOP/CLEAR).
• If you wish to display the start time again, press the CLOCK/PRE-
SET button.
• In order to deactivate the automatic start time, press STOP/
CLEAR.
• When the pre-set time has been reached, the microwave will start
operation. Two signal tones will indicate the start.
80
Display
P100 (Power setting)
P100
(Power setting)
7:30 (Cooking time)
10:45 (Current time)
14:45 (Set hour)
14:45
14:20 (Set minutes)
10:45 (Current time)
WARNING: Risk of fire!
• Always supervise the device during operation.
• When using the time-delay function, set the time in such a way that
the device will be operating under proper supervision.
• Do not operate the microwave empty.
• If you take the food earlier from the device, you will have to termi-
nate the function by pressing the STOP/CLEAR button.
Locking (Child-proof lock)
Press and hold the STOP/CLEAR button for more than 3 seconds to
lock the device. The display will show the locked setting. The functions
of the controls are blocked. Press and hold the STOP/CLEAR button
again for more than 3 seconds to unlock.
Display function
• During microwave, grilling, combination or convection (without
preheating) mode, the mode or temperature setting is displayed by
pressing the buttons MICROWAVE, DOUBLE GRILL/COMBI. or
CONVECTION for 2 - 3 seconds.
• In disregard to the operation mode, the display will be showing the
current time for 2-3 seconds when pressing the CLOCK/PRE-SET
button.
• During time-delay mode, press the CLOCK/PRE-SET button to
display the start time.

Cleaning

WARNING:
Turn the microwave off and remove the mains plug.
CAUTION:
• Do not use any wire brush or other abrasive objects.
• Do not use any acidic or abrasive detergents.
• Do not use a metal scraper to clean the viewing window. The
surface could be scratched and the glass could possibly break.
Interior
• Keep the interior of the microwave clean. Use a damp cloth to
remove splashing and spilling on the walls of the microwave. If the
device is very dirty, you may also use a mild detergent.
• Use a damp cloth to wipe the viewing window inside and outside,
and regularly remove splashing and spots caused by spilled liquids.
Exterior
• Clean the exterior walls of the enclosure with a damp cloth only.
Make sure no water enters the openings in the enclosure and there-
fore the inside of the device.
• Use a damp cloth to clean the switches. When cleaning the function
switches, first open the door in order to avoid accidentally switching
on the device.
Accessories
• If required, clean the metal plate with dish detergent.
• Regularly clean the guide ring and the inside of the bottom. You
may remove the guide ring and manually clean it. Use a mild deter-
gent or glass cleaner. Dry thoroughly. Make sure to position the ring
properly afterwards.
• Clean the grill after each use with a dishwashing detergent or place
it in a dishwasher for cleaning.
• Clean the pizza stone after each use with a damp cloth. Leave it
to air dry. Only use it when completely dry. If wet, microwaves can
cause the pizza stone to crack.