F - Electrical Connection; Knowledge Of The Machine; Handle Tilt Adjustment - Nilco 433 OSD Gebrauch Und Wartung

2.2.f - Electrical connection

- Connect the machine power cable to a
mains socket whose characteristics cor-
respond to those shown on the machine's
technical data plate.
WARNING:
- Unwind the power cable completely be-
fore turning on the appliance.
- Use an extension cord only if in perfect
condition and make sure the diameter
is appropriate for the power of the ap-
pliance.
- Never allow the power cable to slide
over sharp edges and do not crush it.
- The socket should be easily accessi-
ble.
- Make sure the electrical cable is not
damaged.
3.1 KNOWLEDGE OF THE
MACHINE
4) Wheels
3) Handle tilt lever
5) Machine body
7) Head lifting and machine movement
handle
11-12) Supports
27) Guide handle
28) Electric control box
29) Brush rotation start levers (on-off)
30) Water supply adjustment lever
31) Power cable
32) Brush rotation lever release button
33) Wax spray start button (optional)
34) Pusher tags (optional)
4.1 HANDLE TILT
ADJUSTMENT (Fig.
WARNING:
The handle position must be adjusted
while the appliance is at a standstill.
- Pulling the lever (3) the handle position
can be adjusted (27);
when the lever is released, the handle is
positioned and locked in the closest posi-
tion required.
NOTE:
Adjust the handle to a comfortable position,
depending on your height, in order to easily
push the machine in straight paths.
Never start the machine without having tilted
the handle correctly.
ENGLISH - 5
(Figs. 17-18)
19)