Technical Characteristics; Introduction; Intended Use Of The Machine; Non-Intended Use Of The Machine - Nilco 433 OSD Gebrauch Und Wartung

1.1 TECHNICAL CHARACTERISTICS

Working width - ø brushes
Oscillations per minute
Voltage
Frequency
Brush motor power
Brush pressure
Motor passage height
Dry suction socket
Noise emission
Drive
Cable length
Weight (without accessories)
Size

1.2 INTRODUCTION

DANGER:
Before using the appliance, read the accom-
panying "SINGLE DISC SAFETY WARN-
INGS" booklet carefully.
This manual forms an integral part of the ma-
chine itself. It must therefore be kept in a safe
place where it is accessible to all users (opera-
tors and maintenance personnel) throughout
the life of the machine until it is scrapped.
1.3 - INTENDED USE OF
THE MACHINE
The machine has been designed and built:
for professional use, for cleaning floors and
carpets, for polishing floors, for sanding
floors (e.g. parquet and uneven surfaces).
mm 285 CON PAD
mm 730X450X1200
DANGER:
Any other use releases the manufacturer
from liability for harm to persons and/or
property and invalidates any warranty
condition.
1.4 - NON-INTENDED USE
OF THE MACHINE
WARNING:
The machine is not intended for outdoor
use.
DANGER:
- do not wash floors with water above 50 °C;
- do not use diesel/petrol or corrosive de-
tergents to wash floors;
- do not wash and suck up corrosive, flam-
mable or explosive liquids, even if diluted.
ENGLISH - 3
mm 430
n. 1500
V 220/240
Hz 50
W 1300
g/cm² 37
H=25mm
YES
dB(A) 59.5
DIRECT
12 m
Kg 64.8