Commissioning; Radio Components; Procedure; Tips For Teaching-In Radio Compon- Ents - Maico ECA 100 ipro RC Montage- Und Betriebsanleitung

6 Cover
7 Designer cover
5. Fit designer cover.

8.5 Commissioning

1. Switch the mains fuse on.
2. Run function test.

9 Radio components

9.1 Procedure

For information on the function and program
levels → MAICOsmart system description [} 22].
To teach-in an RC fan, remove the housing cover
and then reattach it → Preparation for installation
[} 24].
Operation with stand-alone fan
1. On the fan, first teach-in the RLS RC room air
control and then the radio switches and/or ra-
dio window contacts.
2. Teach-in further system components.
3. Perform function test with all system compon-
ents.
Master/slave network
1. First teach-in the pre-configured RLS RC room
air control on the master fan.
2. Then teach-in the radio switches, radio win-
dow contacts and further slave fans.
3. Teach-in radio switches and radio window
contacts on the slave fans (max. 2 fans).
4. Carefully press the housing cover (incl. de-
signer cover) onto the housing, until it en-
gages with the safety catches.
5. Perform function test with all system compon-
ents.
9.2 Tips for teaching-in radio com-
ponents
A fan automatically becomes a master if the
master fan is set to receive mode and a teach-
in telegram is received from a slave fan.
If a master fan is accidentally taught into a
slave fan, the master assignment ceases to ex-
ist (master fan becomes a slave fan). This can
result in having to re-enter all system compon-
ents.
• A fan becomes a slave fan if it transmits a
teach-in telegram to the master unit and the
master unit confirms this telegram.
• If the RC master or slave fan receives a valid
teach-in telegram from a radio component that
has not yet been taught-in, the data is evalu-
ated and stored.
• If the radio component has already been
taught-in, the teach-in telegram is deleted, that
means that the teaching-in must be repeated.
• If there is no reception within 60 seconds, the
teaching-in is terminated and the LED on the
fan switches off. The procedure must be re-
peated.
• Teach-in telegrams from non-supported radio
components are ignored.
9 Radio components
27