Quax COCOON 54F01-0400 XL Serie Bauanleitung Seite 40

COCOON 54F01-0400xXL
Step 4.10 : Use the drawer front 13, the drawer sides 14 and 15, two connectors F, two wooden dowels E and two minifi x
G, the drawer back 16, four wood screws C, the drawer bottom 17, three wood screws I, the rest of the slider parts L and
six wood screws B.
Tighten the connectors (F) in the drillings on the inside of the drawer front (13). Push a wooden dowel (E) into the holes
on the front of the drawer sides (14 and 15). Push a minifi x (G) into the drilling on the inside of the sides. Place the drawer
back (16) between the drawer sides. Push the wood screws (C) in the holes at the rear outside of the drawer sides and
tighten them in the back. Push the drawer front with its connectors into the drillings of the drawer sides. Tighten the mini-
fi x. Slide the bottom (17) into the slot of the drawer front and secure in the back using the wood screws (I). Place the inner
slider parts on the holes of the drawer sides. Attach each slider with three wood screws (B).
Step 4.11 : Use the doors 10, 11 and 12, ten hinges P and twenty wood screws A
Place the hinges (P) on the drillings in the doors (10, 11 and 12) and secure each hinge with two wood screws (A).
Quax nv Karel Picquélaan 84 B-9800 Deinze Belgium T T 0032 9 380 80 95 www.quax.eu - E E info@quax.eu
40