Herunterladen Inhalt Inhalt Diese Seite drucken

Smart Pause; Bridge Zone; Hints And Tips - Sharp KH-9I39CS00-EU Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 61
Performance and time may vary
according to the quantity of food in
the pan and the quality of the pan. 1.5
litres of water or 0.5 litres of oil gives
the best cooking performance with
these functions.
Smart Pause
The Smart Pause, when activated,
reduces the power of all burners that
have been switched on.
If you then deactivate the Smart
Pause, the heaters will automatically
return to the previous level.
If the Smart Pause is not de-activated,
the cooktop will turn off after 30
minutes.
Press (
) to activate Smart Pause.
The power for the activated heater(s)
will reduce to level 1 and "II" will
appear on all the displays.
Press (
) again to deactivate
Smart Pause. "II" will disappear and
the heaters will now run at the level
previously set.
Bridge Zone
Switching the Bridge Zone On
Touch the bridge function button
to activate the bridge zone.When
the bridge zone function has been
activated left two zone displays
will show 'b,r' and bridge function
button led will illuminates higher than
beginning illuminate.
Select the temperature setting by using
the sliding button. Increase the heat
setting by pressing the right side of
the sliding button or decrease the heat
setting by pressing the left side of the
sliding button.
The bridge element will be ready to
use. For the fastest boil time, select the
desired cooking level, then press the
"P" key to activate the Boost function.
Switching the Bridge Zone off
Touch the bridge function button then
heater level automatically down to "0".
If the bridge cooking zone is hot, "H"
will be displayed.

HINTS AND TIPS

Cookware
· Use thick, flat, smooth bottomed
cookware, that has the same diameter
as the element. This will help reduce
cooking times.
· Cookware made of steel, enamelled
steel, cast iron and stainless steel
(if appropriately labelled by the
manufacturer) will give you the best
results.
· Cookware made of enamelled steel
or aluminium or copper bottoms can
cause a metallic residue to remain on
the hob. If left, this becomes difficult to
remove. Clean the hob after every use.
· Cookware is suitable for induction if
EN

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis