Installing The Windows And Doors; Fit The Skirting Boards; Ventilation Slit Installation; Installing The Outer Roof - Sentiotec SCALA Large Montageanleitung

Instructions for installation p. 14/14

4.7. Installing the windows and doors

First insert the window frame on the inside and screw it to the cabin wall.
Insert the glass from the outside and fit the second window frame.
Place the inner door from the lobby into the door opening and fix it by fitting
the door panel inside from the sauna interior.
Place the outer door in the door opening and fix it by fitting the door panel
from the inside.

4.8. Fit the skirting boards

4.9. Ventilation slit installation

4.10. Installing the outer roof

Glue and screw the roof rafters and place them in the recesses according to
the illustration. Screw the roof rafters to the block planks. Attach the tongue
and groove planks to the roof rafters.
Attach the battens 82°- 40x40 to the side of the tongue and groove planks and
the wind battens 82° 1571x150x40 on the top.
Attach the wind battens 2295x150x20 to the front and back.
The roofing felt included in the scope of delivery serves as an initial roofing.
We also recommend covering the roof with bitumen shingles, sheet metal or
a suitable foil.

4.11. Installing the terrace

Place the floor frame of the terrace as shown in the photos (see page 32) and
screw it to the base frame of the cabin. Then mount the cover boards (825x95x25)
to the base frame.
Fit the floor boards.

4.12. Installing the corner strips and ventilation grille

4.13. Installing the screen elements and roof supports