Next Level Racing WHEEL STAND 2.0 Bedienungsanleitung Seite 9

07
Line up the front hole on the wheel plate with the wheel post hole secure using 1x M8 55mm bolt,
washer and nut. Repeat on the other side.
08
Adjust the wheel plate to your preferred angle and bolt through securing using 1x M8 55mm bolt,
washer and nut. Repeat on the other side.
Video Instruction: bit.ly/nlrbuild
PARTS:
• • Wheel Deck
• • 2x M8 55mm Bolts
• • 2x M8 Washers
• • 2x M8 Nuts
PARTS:
• • 2x M8 55mm Bolts
• • 2x M8 Washers
• • 2x M8 Nuts