Installation - IFM Electronic efector160 LI5 Bedienungsanleitung

2. Installation

A = response level
H = height of the tank
SH = height of the neck
L = probe length (probe)
L1 = installation length
L2 = outside length
L3 = mounting length
MET = maximum immersion depth (= active zone, 25 mm)
Mount the unit vertical from the top.
Mounting length (L3): minimum 60 mm.
For safe and easy mounting use the ifm mounting accessories (Order
no. E43000 - E43006).
Maximum vessel pressure when mounted with mounting acces-
sories: 0.5 bar.
• If possible, mount the unit in the middle of the tank when it is
installed in small plastic tanks:
• When installed in metal tanks the distance between sensor and
tank wall / tank bottom must be min. 20 mm.
All manuals and user guides at all-guides.com
13