Replacing The Squeegee Blades - IPC CT80 Bedienungsanleitung

"ONBOARD" battery charger:
► Lift the dirty water tank
► Unplug the battery charger.
► Plug the cable into the power socket (fig. 25).
► Start the recharge cycle.
► The display will show when the recharge cycle ends, see
► At end of the recharge cycle, unplug the cable from the power socket.

Replacing the squeegee blades

► Switch the machine on, lower the squeegee by pressing the suction motor button.
► Remove the suction hose from the squeegee (fig. 26).
► Unscrew the fastening knobs.
► Remove the squeegee from the slots on the support.
25
26
"Display alarms"
GB 33