English; Before Use; Parts And Accessories - Kenwood Triblade XL+ HBM60 Bedienungsanleitungen

English

Before Use

Please read the user instructions carefully
and completely before using the appliance
and retain for future reference. Remove all
packaging and labels and dispose them
appropriately.
Caution
The blades are very sharp!
z
To avoid injuries, please
handle blades with
utmost care.
Care shall be taken when handling the
z
sharp cutting blades, emptying the
bowl and during cleaning.
This appliance can be used by persons
z
with reduced physical, sensory or
mental capabilities or lack of expe-
rience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a
safe way and if they understand the
hazards involved.
Children shall not play with the appli-
z
ance.
This appliance shall not be used by
z
children.
Children shall be kept away from the
z
appliance and its mains cord.
If the supply cord is damaged, it must
z
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
Always switch off and unplug the ap-
z
pliance when it is left unattended and
before assembling, disassembling,
cleaning and storing.
Before plugging into a socket, check
z
whether your voltage corresponds with
the voltage printed on the bottom of
the appliance.
This appliance is designed for house-
z
hold use only and for processing
normal household quantities.
Do not use the appliance for any
z
purpose other than the intended use
12
described in the user manual. Any
misuse may cause potential injury.
Do not use any part in the microwave.
z
Please clean all parts before first use
z
or as required, following the instruc-
tions in the Care and Cleaning section.

Parts and Accessories

1 Variable speed regulator
2 Variable speed button (on/off)
3 Turbo button (T)
4 Motor part
5 Twist lock
6 Blender shaft
7 Beaker
8 Whisk accessory
a Gearbox
b Whisk
9 Puree accessory
a Gearbox
b Puree shaft
c Paddle
10 500 ml chopper accessory «mc»
a Lid (with gear)
b Chopping blade
c Chopper bowl
d Anti-slip rubber ring
How to Use the Appliance
Variable speed regulator
When activating the variable speed button
(2), the processing speed corresponds to
the setting of the variable speed regulator
(1). The higher the setting, the faster the
chopping speed. You can adjust the speed
conveniently during operation by turning
the speed regulator.
Maximum processing speed can be
achieved by pressing the Turbo button
(3). You may also use the Turbo button for
instant powerful pulses without having to
manipulate the speed regulator.