Cleaning The Main Unit; Cleaning The Blender; Cleaning The To-Go Blender Jug And To-Go Blade Insert; Using The Cleaning Pro- Gramme - Bosch VitaPower 4 Serie Gebrauchsanleitung

en Cleaning and servicing
8.3 Cleaning the main unit
WARNING
Risk of electric shock!
An ingress of moisture can cause an
electric shock.
Never immerse the appliance or
▶
the power cord in water or clean in
the dishwasher.
Do not use steam- or high-pres-
▶
sure cleaners to clean the appli-
ance.
Wipe down the main unit with a
▶
soft, damp cloth.
8.4 Cleaning the blender
WARNING
Risk of cutting!
The blender knife has sharp blades.
When cleaning and emptying the
▶
blender jug, watch out for the
sharp blades.
Never touch the edges of the
▶
blades with bare hands.
ATTENTION!
The blender knife has sharp blades.
Improper handling may damage the
blades or the surface.
Never set the blade insert down
▶
with the blade facing downwards.
Remove the measuring jug.
1.
→ Fig.
28
Remove the lid.
2.
→ Fig.
28
Turn the blender jug anti-clockwise
3.
and remove it from the main unit.
→ Fig.
29
Turn the blender jug upside down.
4.
Open the retaining bracket.
5.
→ Fig.
30
Remove the EasyClick blade insert
6.
from the blender jug.
→ Fig.
30
38
Clean the components.
7.
8.5 Cleaning the To-Go
blender jug and To-Go
blade insert
ATTENTION!
The blender knife has sharp blades.
Improper handling may damage the
blades or the surface.
Never set the blade insert down
▶
with the blade facing downwards.
Turn the To-Go blade insert anti-
1.
clockwise and remove it from the
To-Go blender jug.
→ Fig.
31
Turn the lid anti-clockwise and re-
2.
move it from the To-Go blender
jug.
→ Fig.
32
Open the mouthpiece on the lid.
3.
→ Fig.
32
Remove the seal.
4.
→ Fig.
32
Clean the components.
5.
8.6 Using the cleaning pro-
gramme
You can use the cleaning pro-
gramme to preclean the blender jug
and the blade insert.
Requirements
¡ The blade insert is installed.
¡ The blender jug has been attached
and locked.
¡ The blender jug is filled with clean-
ing fluid (700 g water + 1 drops of
washing-up liquid).
¡ The lid is attached and locked.
¡ The rotary switch is set to ⁠ .
Set the rotary switch to ⁠ .
1.
→ Fig.
9
a The status display (LED) on the
rotary switch lights up.