EN
OPERATION
User setting
Press the menu button in standby mode to open
the main menu.
Press the image button or the function key to
select Intercom Setting in the menu.
Press the speech button to confirm.
Menu Intercom Setting
Press the image button or the function key to
select User Setting in the menu.
Press the speech button to confirm.
Menu User Setting
Press the image button or the function key to
change the parameters.
Key tone: activate / deactivate the key tone
Key tone activated: When touching the sensor buttons, a
tone sounds.
Ring tone Vol: volume ring tone, 8 grades
Bright: screen brightness, 20 grades
Contrast: image contrast, 20 grades
Colour Sat: colour saturation, 20 grades
Press the speech button to store the settings
and switch over to the next parameter.
20
www.tcsag.de
Installer setting
Press the menu button in standby mode to open
the main menu.
Press the image button or the function key to
select Intercom Setting in the menu.
Press the speech button to confirm.
Select Intercom Setting in the menu
Press the image button or the function key to
select Installer Setting in the menu.
Select Installer Setting in the menu
Simultaneously press the call OFF button and the
image button to open Installer Setting in the menu.
Menu Installer Setting