Drainage Instructions - Hantech A020BA-Serie Bedienungsanleitungen

3）Elongate the exhaust pipe and snap the flat end of the exhaust pipe joints into the hole of the
window sealing
plate assembly (as shown in Fig.5 and Fig.6) .
Notes：1、the flat end of the exhaust pipe joints must be snapped into place.
3、 The pipe cannot be distorted nor has substantial turning (greater than 45 °). Keep the
ventilation of the exhaust pipe not blocked.
Important Notice:
The length of the exhaust hose shall be 280~1,500mm, and this length is based on the
specifications of the air conditioning. Do not use extension tubes or replace it with other different
hoses, or this may cause a malfunction. Exhaust host must be not blocked; otherwise it may
cause overheating.
VI.

Drainage Instructions

This machine has two drainage methods: manual drainage and continuous drainage.
1．Manual drainage:
1)
When the machine stops after the water is full, turn off the machine power and unplug the
power plug.
Figure4
Figure 5 Figure 6