Hantech A020BA-Serie Bedienungsanleitungen Seite 12

Notes：Please move the machine carefully, so as not to spill the water in the water pan at the
bottom of the
2)
Place the water container below the side water outlet behind the body.
3)
Unscrew the drainage cover and unplug the water plug, the water will automatically flow into
the water container.
Notes：1）Keep the drainage cover and the water plug properly.
2）During drainage, the body can be tilted slightly backwards.
3）If the water container cannot hold all the water, before the water container is full, stuff the
water outlet
with the water plug as soon as possible to prevent water from flowing to the floor or the carpet.
4）When the water is discharged, stuff the water plug, and tighten the drainage cover
2．Continuous drainage (Optional) (only applicable to dehumidifying mode), as shown in figure:
1)
Unscrew the drainage cover, and unplug the water plug.
2)
Set the drainage pipe into the water outlet.
3)
Connect the drainage pipe to the bucket.
body.