Hantech A020BA-Serie Bedienungsanleitungen Seite 4

Notes:
*The air conditioning is only suitable for indoor use, and is not suitable for other
applications.
*Follow local grid interconnection rules while installing the air conditioning and ensure
that it is properly grounded. If you have any question on electrical installation, follow the
instructions of the manufacturer, and if necessary, ask a professional electrician to
install it.
*Place the machine in a flat and dry place and keep a distance of above 50cm between
the machine and the surrounding objects or walls.
*After the air conditioning is installed, ensure that the power plug is intact and firmly
plugged into the power outlet, and place the power cord orderly to prevent someone
from being tripped or pulling out the plug.
*Do not put any object into the air inlet and outlet of the air conditioning. Keep the air inlet
and outlet free from obstructions.
*When drainage pipes are installed, ensure that the drainage pipes are properly
connected, and are not distorted or bended.
*While adjusting the upper and lower wind-guide strips of the air outlet, pluck it with
hands gently to avoid damaging wind-guide strips.
*When moving the machine, make sure that it is in an upright position.
*The machine should stay away from gasoline, flammable gas, stoves and other heat
sources.
*Don't disassemble, overhaul and modify the machine arbitrarily, otherwise it will
cause a machine malfunction or even bring harm to persons and properties. To avoid
danger, if a machine failure occurs, ask the manufacturer or professionals to repair it.
*Do not install and use the air conditioning in the bathroom or other humid
environments.
*Do not pull the plug to turn off the machine.
*Do not place cups or other objects on the body to prevent water or other liquids from
spilling into the air conditioning.
*Do not use insecticide sprays or other flammable substances near the air conditioning.
*Do not wipe or wash the air conditioning with chemical solvents such