Product Description; Technical Specifications; Normative References - Cleco mPro400GCD-P Bedienungsanleitung

3

Product Description

Cleco Production Tools Controllers are for use with safety-
critical screwed connections.
Each controller is to be used as a control and monitoring
device for one or more tools at a workstation. Desktop soft-
ware is available to enable management of the controller
remotely.
Each controller comes with software pre-installed. The
minimum settings for bolt connections must be carried out
by a qualified person using the controller or a PC to start
fastening.
4

Technical specifications

Ambient conditions
Features
Operation site
Ambient temperature
Storage temperature
Type of cooling
Relative humidity
Working height
Degree of protection
DIN EN 60529 (IEC 60529)
Protection class
DIN EN61140
(VDE0140-1)
Degree of contamination
EN 61010
Transient overvoltage
EN 61010
Shock max.
DIN EN 60068-2-27
Vibration max.
DIN EN 60068-2-5
1. Note derating. See system handbook.
Apex Tool Group
Data
Indoors
1
0...45 °C
-20...70 °C
Convection (self-cooling)
10 – 90%, no condensa-
tion
Up to 3000 m (9,843 ft)
above sea level
IP42
I
2

CAT
15 G
59.6–160 Hz: 2 G
P2300HW | 2019-03
Power supply
Features
Supply voltage
single-phase
Rated supply current
Frequency
Peak current
Rated power
Idling
1. When operating outside the allowable voltage limits,
the integrated power supply enters a protection mode
and shuts down. This protection mode can be reset by
restarting the nutrunner control.

4.1 Normative References

Product-relevant EC directives and the standards complied
with, see EC Declaration of Conformity.
Certifikates
Issuing authority TÜV SÜD AG
Certificate No. U8 18 01 78313 004
Tested according • UL 61010-1:2012/R:2016-04
• CAN/CSA–C22.2
No.61010-1:2012/U2:2016-04
Certificate No. N8A 18 01 78313 003
Tested according • EN 61010-1:2010
Certificate No. DE3-30610
Tested according • IEC 61010-1:2010
System data
Features Data
System functions Battery buffered RealTimeClock, buf-
fer time: 20 years (at 20 °C)
Display LC display with touchscreen, 10.4"
TFT liquid crystal display,
resolution 800 x 600, connection to
Panel & Touch possible
Operating system OS-9000, real-time operating system,
bootable without mechanically mov-
ing drives, no UPS required
HMI (Human- Virtual keyboard for alphanumeric
Machine Inter- inputs
face)
Weight
Model
mPro400GCD-P
Data
1
100–240 VAC ±10%
1–2 A
50/60 Hz
16 A
1600 VA max.
160 VA
lb kg
30.2 13.7
9
1
EN