Connecting Headphones - Silvercrest SBKO 4.0 A1 Bedienungsanleitung Und Serviceinformationen

First use
Switching the headphones on/off
Switch on the headphones by pressing the
(4) for at least one second. The LED (8) flashes blue
and thus indicates standby mode. If the headphones
were switched on for the first time and had never been
connected to a device, pairing mode is started
automatically. The LED (8) alternates between flashing
blue and orange in pairing mode. Read the next section
when connecting your device.
Press the
switch off the headphones.

Connecting headphones

Proceed as follows to connect the headphones to your
device:
 Switch off the headphones.
 To start pairing mode, press the
at least 5 seconds until the LED (8) alternates
between flashing blue and orange.
 The headphones are now in search mode. In search
mode, you can connect a compatible device to the
headphones via the Bluetooth
 Then connect your smartphone or audio / media
player to the headphones via Bluetooth
details, please read the instructions of your
smartphone or media player. Select the device
"SBKO 4.0 A1" from the list of devices which are
found and establish the connection. If you are asked
for a PIN, enter "0000".
▸ll button (4) for at least 4 seconds to
SilverCrest SBKO 4.0 A1
▸ll button (4) for
®
function.
▸ll button
®
. For further
English - 67