STEPCRAFT M Serie Betriebsanleitung Seite 40

Remove the control cover of your CNC machine. See
chapter 3.3.1 (construction manual) of your CNC ma-
chine for reference.
In order to assemble the Tool Magazine, remove
the last panel of your machine table. Unscrew the
STEPCRAFT EasyFix nuts and lift the panel In case
you have an MDF machine table, you will have to ad-
ditionally remove the last T-slot profile. See chapter
4.0 (construction manual) of your CNC machine for
reference.
Place the Tool Magazine onto your machine table. Be
sure the tool magazine cannot fall down.
38