Herunterladen Inhalt Inhalt Diese Seite drucken

WimTec SanTec ECOSAN Montage- Und Bedienungsanleitung Seite 10

Inhaltsverzeichnis

Werbung

Montage, Installation, xxx, xxx, xxx, xxx
F
E
GB
Program 1 – standard (pre-adjusted)
Water flows as long as hands are in the
active range. Automatic flushing stop after
60 s (adjustable).
Continuous flow:
1x
Push the small button on the left side of the tap
once. Continuous flow stops after the adjusted
time is elapsed or after pushing the button again.
Program 2 – Hygiene flushing every 3
as program 1, though hygiene flushing will be released for 10 s after 3 hours non-use
Program 3 – Hygiene flushing every 24
as program 1, though hygiene flushing will be released for 10 s after 24 hours non-use
Program 4 – Hygiene flushing every 3
as program 2, though with the possibility of thermal disinfection for 10 min.
Thermal disinfection will be deactivated, if someone reaches the active range.
Activating thermal disinfection: by pushing the small button on the left side of the tap
four-times quickly (within 1,5 s)
Program 5 – Hygiene flushing every 24
as program 3, though with the possibility of thermal disinfection for 10 min.
Thermal disinfection will be deactivated, if someone reaches the active range.
Activating thermal disinfection: by pushing the small button on the left side of the tap
four-times quickly (within 1,5 s)
10
All manuals and user guides at all-guides.com
Operation, Commande, Operación
1x
Hands outside the active range, water
flow stops.
Cleaning stop:
2x
Push the small button on the left side of the
tap twice quickly (within 1 s)
Cleaning stop is activated for 180 s.
Cleaning stop ends after pushing the button
again once.
hour
rd
hour
th
hour + thermal disinfection
rd
hour + thermal disinfection
th
1x

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis