Preferences - Preferred Settings - Blaupunkt CVX 02 PROFESSIONAL Bedienungsanleitung

Gamma correction
The setting for gamma correction is
located in "Quality" under "Gamma".
You can adjust the gamma correction
for playback on TFT displays. You can
select among the settings "High",
"Medium", "Low", and "None".
Colour
The setting for colour is located in
"Quality" under "Hue".
You can adjust the colour in increments
from -9 to +9.
Colour saturation (for NTSC only)
The setting for colour saturation is
located in "Quality" under "Saturation".
You can adjust the colour saturation in
increments from -9 to +9.
Luminance (for NTSC only)
The setting for luminance is located in
"Quality" under "Luma Delay".
You can select the settings "0T" and
"1T" for luminance.

Preferences - preferred settings

Under "Preferences", you can set the
television standard of the external moni-
tor, switch playback control (PBC) on
and off, set the preferred playback lan-
guage, select the preferred language for
subtitles, set the parental control, and
reset the device.
To call up the preferred settings,
press the STOP = button twice
on the remote control.
Press the SETUP O button on the
remote control.
Select "Preferences Page" using
the buttons
control or the arrow buttons on the
device.
Press the OK ? button on the re-
mote control to confirm your entry.
Setting the colour television
standard of the TV device
The setting of the television standard is
performed under the "TV TYPE" menu.
For a perfect image quality, set the col-
our television standard on the device
which is used by the attached monitor.
"PAL" is the standard used in Europe,
"NTSC" is the standard for the Ameri-
can/Asiatic region.
If you select the "Multi" setting, the
standard of the DVD is used for the
output.
DVD SETUP
@ of the remote
39