Internal Light; Control Panel; Programmes - AEG FFB83816PM Benutzerinformation

• When the appliance has a
malfunction, the red light flashes.
Beam-on-Floor is off when
the appliance is deactivated.
When AirDry is activated
during the drying phase, the
projection on the floor may
not be completely visible. To
see if the cycle is finished,
check the control panel.

4. CONTROL PANEL

On/off button
1
Display
2
Program touch button
3
Delay touch button
4
MyFavourite touch button
5
4.1 Indicators
Indicator

5. PROGRAMMES

The numbering of the programmes in the
table (P1, P2, etc.) reflects their
sequence on the control panel.
1
Description
Salt indicator. It is on when the salt container needs refilling.
Rinse aid indicator. It is on when the rinse aid dispenser needs refilling.

3.2 Internal light

The appliance has an internal lamp. It
comes on when you open the door or
switch the appliance on while the door is
open.
The lamp goes off when you close the
door or switch the appliance off.
Otherwise, it goes off automatically after
some time to save energy.
2 4 5
3
TimeSaver touch button
6
XtraDry touch button
7
XtraHygiene touch button
8
Indicators
9
The order of the programmes in the table
may not reflect their sequence on the
control panel.
ENGLISH
6 7 8 9
7