Focal DIMENSION Bedienungsanleitung Seite 27

DIMENSION
U s e r m a n u a l
Problem
No sound is coming from
Dimension, the Standby
button is flashing and the
volume + button is lit.
No sound is coming from
Dimension, the Standby but-
ton is flashing and the HDMI™
TV button is lit.
No sound is coming from
Dimension, the Standby
button is flashing and one or
two other buttons are lit.
No sound
No sound is coming from your
Dimension Sub subwoofer.
Possible causes
The overheating protection
has been activated due
to excessive amplifier
temperature.
The overheating protection
has been activated due to
overcurrent.
Dimension's microprocessor
has stopped working due to
a considerable electric shock.
The cables have not been
connected correctly or there
is a fault with one or more
cables.
The desired source has not
been selected.
The volume is set to
minimum or the Mute
function has been activated.
Your audio-video source is
transmitting an audio format
not recognised by Dimension.
The HDMI™ devices
connected to Dimension do
not support HDCP
(High-Bandwidth Digital
Content Protection).
The cable has not been
connected correctly or there's
a fault with the cable.
The "SUBWOOFER" selector
setting is positioned
incorrectly.
Possible solutions
Unplug the system, wait for
an hour until it cools down,
then turn Dimension back on.
Unplug the system, wait for
an hour until it cools down,
then turn Dimension back on.
Unplug the system, wait
for five minutes, then turn
Dimension back on.
Check connections.
If the problem persists,
interchange the cables.
Select the desired source
using the remote control
(input button) or the user
interface.
Adjust the volume according
to the desired level using the
+ or - buttons, or deactivate
the Mute function.
In the source settings, select
an audio format supported by
Dimension.
Connect an audio-video
device which supports HDCP.
Check the cable
is connected correctly.
Check that the
"SUBWOOFER" selector
is set to 11 - "DIMENSION
SUBWOOFER OUT".
27
More
information
/
/
/
Page 18
Page 8 & 10
Page 10
Page 25
/
Dimension
Sub user
manual
Page 17