Herunterladen Inhalt Inhalt Diese Seite drucken

Temperature Indicator - Hama RC 45 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für RC 45:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 8
5.2 Manually setting the time format, time
and date
• Press and hold the mode button (4) for approx. 3
seconds to start manually setting the time format,
date and time.
• Set the following information in the order listed:
• Time format (12-/24-hour), time zone, hour,
minute, year, month, day, language (weekday)
• To select each value, press the p button (2) or
the q button (3), and con rm each selection by
pressing the mode button (4).
• If you do not make an entry for 30 seconds, the
settings will automatically close.
Note – Input
Hold down the p button (2) or the q button (3)
to select the values faster.
Note – Day of the week
For the weekday display, you can choose amongst
the following languages: German (GER), English
(ENG), Italian (ITA), French (FRE), Dutch (DUT),
Spanish (SPA) and Danish (DAN).
5.3 Alarm settings and display
• Press and hold the alarm on/off button (6) for
approx. 3 seconds to open the alarm settings.
The hours display begins to ash.
• Press the p button (2) or the q button (3) to
select the hours for the alarm time, and con rm
your selection by pressing the alarm on/off
button (6). The minutes display begins to ash.
• Repeat the process to set the minutes for the
alarm time. Once you have con rmed your
minutes selection with the alarm on/off button
(6), the alarm is set and
• If the alarm is triggered, the alarm symbol will
begin to ash and an alarm will sound.
• Press the alarm on/off button (6) to stop the
alarm. Otherwise, it will stop automatically after
2 minutes.
• If you press the snooze/light button (1) during
the alarm, the alarm is interrupted for 5 minutes
and then goes off again. The alarm symbol
ashes. Press any button to disable the snooze
function. The same goes for the alarm signal. The
alarm repeats every 24 hours.

5.4 Temperature indicator

Press the q button (3) to switch between °C and °F
for the temperature display.
5.5 Backlight
Press the snooze/light button (1) to light up the
display for approx. 5 seconds.
shows in the display.
5

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

00136278001362790018637200186373

Inhaltsverzeichnis