Scope Of Delivery; Intended Use; Safety Regulations - Scheppach 7906616701 Original Bedienungsanleitung

7. Solar cell
8. Filter cassette (ADF filter)
9. Rear panel
10. UV/IR filter
11. Delay setting
12. Sensitivity setting
13. Sensor

3. Scope of delivery

m ATTENTION! The device and pack-
aging materials are not toys! Children
must not be allowed to play with plastic
bags, film and small parts! There is a
risk of swallowing and suffocation!
• 1x Auto Dimming Welding Helmet
• 1x Operation manual
• Open the packaging and remove the de-
vice carefully.
• Remove the packaging material as well
as the packaging and transport bracing
(if available).
• Check that the delivery is complete.
• Check the device and accessory parts
for transport damage.
• If possible, store the packaging until the
warranty period has expired.

4. Intended use

This welding helmet protects the eyes and
face from sparks, splashes and UV rays
while welding and automatically adapts to
the lighting conditions.
It ensures an immediate, sensor-con-
trolled darkening upon arc ignition as well
as automatic illumination at the end of the
welding procedure (including a short de-
lay to protect against afterglow).
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
This welding helmet provides a freely ad-
justable DIN protection level with a lateral
adjustment wheel and is also adjustable
for flying sparks during grinding work.
Only use the product as described and
for its indicated purpose. Keep these in-
structions in a safe place. When passing
this product on to others, please also in-
clude all the documents. Any use other
than the intended is prohibited and po-
tentially dangerous. Damages resulting
from non compliance or misuse are not
covered by the warranty and are not in-
cluded in the manufacturer's liability. This
device has been designed for household
use and may not be used for commercial
or industrial purposes.

5. Safety regulations

m WARNING: Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
Following these instructions will prevent
difficulties that may occur during the in-
stallation and use of this Auto Dimming
Welding Helmet. All technical data about
this welding helmet is on the label, please
learn about this product's technical facts.
Please study the instructions first, as they
may save considerable time and trouble
during use, in addition to providing impor-
tant safety information.
Save all warnings and instructions for
future reference.
GB | 21