Osd Menu; Adjustment Bars - ViewSonic VSD243 Bedienungsanleitung

4 OSD Menu

Press the Menu/Exit button on bottom right of your VSD243 to launch the
OSD configuration screen. The OSD configuration screen can be used to
configure the Contrast/Brightness, Input Select, Audio Adjust, Color Adjust,
Information, Manual Image Adjust, Setup Menu and Memory Recall.

4.1 Adjustment Bars

Contrast/Brightness:
Contrast: Select and drag the slider on the Contrast bar to adjust the
contrast of the display. Drag the slider to the right to increase the contrast.
By default, the contrast is set to 70.
Brightness: Select and drag the slider on the Brightness bar to adjust the
brightness of your screen. Drag the slider to the rightto increase the
brightness. By default, the brightness is set to 100.
Audio Adjust:
Select and drag the slider on the Volume bar to adjust the volume. As you
drag the slider to the right, the volume is louder. By default, the volume is
set to 50. Here you can Mute the audio or Listen to other sounds.
C O N T R A S T / B R I G H T N E S S
C O N T R A S T
B R I G H T N E S S
13
OSD Menu
7 0
8 0