Error Messages; Messages D'erreur; Fehlermeldungen; Foutmeldingen - Epson SX510W Benutzerhandbuch

Error Messages

Messages d'erreur

Fehlermeldungen

Foutmeldingen

& 52
R
EN
& 53
R
FR
& 54
R
DE
& 55
R
NL

EN
Error Messages
Press the OK button to replace ink cartridges.
Paper jam. Open the scanner unit and remove the paper.
Press the Start button to eject the paper inside. See your
documentation.
Paper is jammed in the printer. Turn off the printer, open the
scanner unit, remove paper. See your documentation.
No photos could be recognized. Make sure photos are
positioned correctly. See your documentation.
A printer error has occurred. Turn off the printer, then press On
button to turn on. See your documentation.
A scanner error has occurred. See your documentation.
The printer's ink pads are nearing the end of their service life.
Please contact Epson support.
The printer's ink pads are at the end of their service life. Please
contact Epson support.
Cannot recognize the memory card or disk.
Cannot recognize the device.
Communication error. Make sure the computer is connected.
The combination of IP address and subnet mask is invalid. See
your documentation.
Solution
Replace the expended ink cartridges.
R
& 60
R
& 61
R
& 20
R
Turn the printer off and then back on. Make sure that no paper
is still in the printer. If the error message still appears, contact
Epson support.
Turn the printer off and then back on. If the error message still
appears, contact Epson support.
Contact Epson support to replace ink pads before the end of
their service life. When the ink pads are saturated, the printer
stops and Epson support is required to continue printing.
Contact Epson support to replace ink pads.
Make sure the memory card or storage disk has been inserted
correctly. If so, check to see if there is a problem with the card or
disk and try again.
Make sure the connected device is a storage device.
Make sure the cable is connected correctly. If the error message
still appears, make sure that scanning software is installed on
your computer and that the software settings are correct.
See the Networking guide in the online User's Guide for details.
& 56