Technical Data - Klauke TEXTRON SDK 85 CKR Bedienungsanleitung

Instruction manual SDK 85 CKR
__________________________________________________________________________
5.2. Explanation of the application range
The hydraulic cutting tool type SDK85CKR is able to cut copper as well as aluminium
cables and conductors even with a mild led reinforcement.
Attention
Do not cut cables or conductors with a steel reinforcement.
Attention
This tool is not insulated. Do not use on or near energised electrical lines.
Before starting to cut please make sure that all parts involved in the cutting process are
not connected to live circuits.
5.3. Service and maintenance instruction
The hydraulic tool must be cleaned and dried after each use. The unit is basically
maintenance free, only the joints must be lubricated regularly and the tool has to be
inspected for possible damages and wear.
The hydraulic hose (Pos.-No. 5) and the armature must be checked for damage and
leakage.

6. Technical Data

Cutting head (SDK 85CKR):
Cutting range:
Weight:
Hydraulic oil:
max. operation pressure:
Note
Additional copies of this instruction manual are available upon request. The part # is
HE.11536.
All manuals and user guides at all-guides.com
85 mm Ø
approx. 4,7 kg
"Shell Tellus T 15"
700 bar
page 9