Ayce LMA8050D Gebrauchsanweisung Seite 93

c) Before using, always visually inspect to see that the
blade, blade bolt and the blade assembly are not worn
or damaged. Replace worn or damaged components in
sets to preserve balance. Replace damaged or
unreadable labels.
d) Before use check the supply and extension cord for
signs of damage or aging. If the cord becomes
damaged during use, disconnect the cord from the
supply immediately. DO NOT TOUCH THE CORD
BEFORE DISCONNECTING THE SUPPLY. Do not use the
machine if the cord is damaged or worn.
3) Operation
a) Operate the machine only in daylight or in good
artificial light.
b) Avoid operating the machine in wet grass.
c) Always be sure of your footing on slopes.
d) Walk, never run.
e) Mow across the face of slopes, never up and down.
f) Exercise extreme caution when changing direction on
slopes.
g) Do not mow excessively steep slopes.
h) Use extreme caution when reversing or pulling the
machine towards you.
i) Stop the blade(s) if the machine has to be tilted for
transportation when crossing surfaces other than
grass, and when transporting the machine to and from
the area to be used.
92 |93