Troubleshooting - Ayce LMA8050D Gebrauchsanweisung

TROUBLESHOOTING

Warning: before performing any maintenance or cleaning work, always pull out the
battery and wait until the cutter has come to a standstill.
Fault
Motor does not run
Motor power drops
Grass catcher is not
filled
CAUTION! Faults which cannot be rectified with the aid of this table may be rectified
by a specialist company only (customer service centre).
Remedial action
check battery if it has power
Start on short grass or on an area which has already been
mown.
Clean discharge channel/housing – the mowing blade
must rotate freely.
Correct the cutting height.
Correct the cutting height.
Clean discharge channel/housing
Have mowing blade resharpened /replaced
Service centre.
Correct the cutting height
Allow the lawn to dry
Have mowing blade resharpened /replaced
Service centre.
Clean the grille on the grass catcher
Clean the discharge channel /housing
108|109
customer
customer