Lacor 61730 Gebrauchs- Und Instandhaltungsanleitung Seite 36

Multiply
Set the product unit amount using the [0] to [9] buttons, press the [X] button and enter the
number of units in WEIGHT. The total amount will be shown in PRICE TO PAY. Press the [+]
button to add to the memory, press the [CE] button to enter a new amount, and when done, press
the [MR] button to view each amount or the [CHANGE] button to view the final amount.
Sum amounts with or without weight
Place the item to be weighed on the platform, using the [0] to [9] buttons to set the unit price, press
the [M+] button to store this amount and continue adding new ones. Press the [CE]
button, place a new item on the scale, set the unit price, press the [M+] button and the PRICE TO
PAY field will display the sum of the amounts. Press the [CE] button again if you would like to
continue summing amounts.
When done, press the [CHANGE] button to view the total amount, enter the amount received from
the customer, and the change to be returned will be displayed automatically.
To delete any of the intermediate amounts, press the [MR] button until the amount to be deleted
is displayed, and then press the [CE] button. It will be deleted and a new total amount will be
calculated.
Once the entire process is finalised, press the [MC] button to delete all the amounts, or press the
[CE] button to delete the unit price displayed.
USING A and B MEMORIES
The scale is equipped with two 2 fast memories, which will allow you to store 2 unit prices in the
memory. To do so, set the unit price using the [0] to [9] buttons, and then press and hold the
[MEMO A] button until the signal is heard (this means that the value has been stored).
You may repeat this operation with a different unit price using the [MEMO B] button.
Place the product on the scale, press the [MEMO A] button and the unit price will be stored in this
memory.
To delete the values stored in the memories, press the [CE] button and press and hold the [MEMO
A] or [MEMO B] button until the signal is heard. In reality, the value of 0.00 has been stored in the
memory.
USE BY 2 DIFFERENT PEOPLE
The scale has been designed so that 2 different people may operate it, simultaneously adding
amounts. To do so, switch between the operations of operator 1 and operator 2 using the
[MEMORY SELECT] button.
Press the [MEMORY SELECT] button once, and the UNIT PRICE screen will display -2-, which
means that the amount sum operations will now be done for operator 2. When done with the
process, press the [MEMORY SELECT] button and the UNIT PRICE screen will display -1-,
meaning that operator 1 can now sum amounts.
When done with the sum amount operations, press the [CHANGE] button to view the total
amount, and press the [MEMORY SELECT] and [CHANGE] buttons to view the total amount for
the other operator.
HOLD FUNCTION
This function will allow you to maintain the values being displayed for 15 seconds. Place an item
to be weighed and enter its unit price. Press the [HOLD] button for 15 seconds, and the 3 screens
will display the values even if the item is removed from the scale. After this time (and the item
has been removed), the WEIGHT and PRICE TO PAY screens will display zero values.
36