MAIN TECHNICAL SPECIFICATIONS
MODEL:
VOLTAGE:
TARE :
POWER:
SIZE:
WEIGHT:
Warranty Information
This manual provides the installation, safety and operating instructions for the Electronic scale w/
square base. We recommend all installation, operating and safety instructions appearing in this
manual to be read before installation or operation.
Electronic scale w/square base is a product of extensive research and field testing. The
materials used were selected for maximum durability, attractive appearance and optimum
performance. Every unit is thoroughly inspected and tested before shipment.
IMPORTANT!
If the unit changes ownership, be sure this manual accompanies the equipment.
1.- Plug Electronic scale w/square base into a properly grounded
electrical outlet of the correct voltage, size, and plug
configuration. If the plug and receptacle do not match, contact
a qualified electrician to determine the proper voltage and
size, and install the proper electrical outlet.
2.- To avoid any injury, turn the power switch off, unplug the unit
from the power source.
3.- For safe and proper operation, the unit must be located at a
reasonable distance from combustible walls and materials.
If safe distances are not maintained, discoloration or
combustion could occur.
4.- Allow a minimum of 12" (30 cm) clearance along the sides.
Allow a clearance of 20" (50 cm) along the front and rear
discharge to endure proper operation and safety.
61730
220-230V/50-60Hz
30 Kg (10 g)
0,2 W (máx)
30x32x12 cm
4,6 Kg
WORTHY INFORMATION
Keep these instructions for future reference.
WARNING
!
33