Honeywell PEHA Compact 952 JRM Bedienungsanleitung Seite 66

All manuals and user guides at all-guides.com
FunCTIOnS
Function Description
A long press of the pushbutton causes all motors in the central group to move UP or DOWN. A short button press stops the
motors. Jog mode is not possible! All motors in the central group are activated ex works.
Pushbutton mode
Central
Tip: The motors for multiple JRMs can be controlled centrally. This requires a relay connected between the central UP/
DOWN pushbuttons and the I24 and I25 inputs.
A long press of the pushbutton causes the group motors to move UP or DOWN. A short button press stops the motors. Jog
mode is not possible!
Pushbutton mode
Group
– The JRM motors can be assigned flexibly to three groups (0–2; see page 12).
– Group 2 is not available when its mode has been set to "Sensors" (see page 16)!
Auto mode extends to the twilight sensor, sun sensor, and timer. Auto mode can be switched ON and OFF separately for
each output. Alternatively, auto mode can be activated and deactivated at a switch on input I32 of the JRM module. This
requires the corresponding output to be assigned to input I32 (see page 13).
Automatic
The twilight sensor and timer can be combined with each other. In the mornings, the motors do not run until after the timer
has been switched ON and the UP twilight sensor has transmitted an OFF signal. In the evenings, the motors run when the
timer is switched ON or the DOWN twilight sensor transmit an ON signal.
Note: The sun/twilight sensor and the timer cannot be used when auto mode is switched OFF!
G B
GB-21