Temperature Setting - Cino BARI CN-Z01 Bedienungsanleitung

6

Temperature setting

Switch off
5s
5s
At the default temperature, the big and small cup button blink at the same time.
a. For 2℃ down, the small cup button blinks 1 time each 5 seconds, 2 times per second.
b. For 4℃ down, the small cup button blinks 2times each 5 seconds, 2 times per second.
c. For 6℃ down, the small cup button blinks 3times each 5 seconds, 2 times per second.
d. For 8℃ down, the small cup button blinks 4times each 5 seconds, 2 times per second.
On the contrary, if the temperature increase, the big cup button blinks, and different
temperatures correspond to different blinking times;
The temperature adjustment range is 8 ℃ up and down the default temperature
or
When setting is complete , press both big and small cup buttons again for
3s, after "beep", its saved.
Press both the big and
small cup buttons
Press small cup button once and the temperature will decrease 2 degrees, press twice
for 4 degrees and so on. Maximum 8 degrees can be decreased.
Press big cup button once and the temperature will increase 2 degrees, press twice for 4
degrees and so on. Maximum 8 degrees can be increased.
temperature can be adjusted 8℃ above or below the default setting.
5
Switch on: enter the
temperature setting mode