(5) Power LED
Overview
(6) TUYA LED
not used
(2) CH1 Button
(3) CH2 Button
(7) CH1 LED
(4) Indicator LED
(8) CH2 LED
(1) LED Button
(9) SETUP Button
(10) CH1 RELAY
(11) CH2 RELAY
(12) POWER INPUT TERMINAL
Mounting the Receiver
Mounting hole
Mounting hole
Phillips screw
Phillips screw
The receiver can easily be mounted against a wall or ceiling with the 2 mounting holes in the back of the
case. The mounting holes have a diameter of 6,3 mm and the center points are 62,9 mm apart from
each other. Loosen the 2 Phillips screws on the two sides of the case to open the enclosure.