General Safety Notes - Siemens SIDOOR AT40 Betriebsanleitung

1

General safety notes

Before commissioning, please note:
Please read through these instructions carefully. They contain essential information for the installation, use and safety of the
equipment.
WARNING
Only appropriately qualified personnel may work on or in the vicinity of the equipment. Personnel must be thoroughly
familiar with all the warnings, notices, and functions of the AT40 door controller described in the Operating Instructions.
In the context of the Operating Instructions and warning notices, a qualified person is a person who is familiar with
assembling, installing, commissioning, and operating the product, and who has the relevant qualifications, such as:
● Training, instruction or authorization to switch on and off electric circuits and devices/systems in compliance with safety
engineering standards.
● Training or instructions in the maintenance and use of appropriate safety equipment in compliance with safety
engineering standards.
● First aid training.
The successful and safe operation of the equipment is dependent on proper transportation, storage, installation, and
assembly, as well as on careful operation and maintenance. Before commissioning, all electrical connections must be
inspected to ensure that all contacts are secure. Before starting work on the door drive, it must be disconnected from the
power supply by unplugging the power plug.
Note
The illustrations in the instructions refer to Sidoor User Software version 1.11 and AT40 version 1.25. The illustrations for
other versions may differ slightly.
Elevator door drive AT40
A2B00095270A-03, 01/2012
27