Technical Data; Unpacking - Scheppach DC100 Originalbetriebsanleitung

• Check whether the moving parts function faultless-
ly and do not jam or whether parts are damaged. All
parts must be correctly mounted and all conditions
must be fulfilled to ensure fault-free operation of the
tool.
• Damaged protective devices and parts must be re-
paired properly or replaced by a recognised spe-
cialist workshop unless otherwise specified in the
usage instructions.
• Have damaged switches replaced by a customer
service workshop.
• This tool conforms to the applicable safety regula-
tions. Repairs may only be performed by an elec-
trician using original spare parts. Otherwise, acci-
dents can occur.
• If necessary, wear suitable personal protective
equipment. This could include:
- Hearing protection to avoid the risk of becoming
hearing impaired;
- Respiratory protection to avoid the risk of inhaling
harmful dust.
• The operator must be informed about the condi-
tions that influence the noise generation.
• Errors in the machine must be reported to the per-
son responsible for safety as soon as they are dis-
covered.
• This device is not designed to collect dangerous
dust.
• This device is not designed to be operated by per-
sons (including children) with impaired physical,
sensory or mental capabilities, or who have insuffi-
cient experience and/or insufficient knowledge un-
less they are being supervised by a person who is
responsible for their safety or they are receiving in-
struction about how this device is to be used. Chil-
dren should not be left unattended, to ensure they
do not play with the device.
Warning! This electric tool generates an electromag-
netic field during operation. This field can impair ac-
tive or passive medical implants under certain condi-
tions. In order to prevent the risk of serious or deadly
injuries, we recommend that persons with medical
implants consult with their physician and the manu-
facturer of the medical implant prior to operating the
electric tool.
Residual risks
The machine has been built according to the
state-of-the-art and the recognised technical
safety requirements. However, individual residu-
al risks can arise during operation.
• Risk to health from wood dust or wood chippings.
Wearing personal protective equipment such as
protective goggles and dust masks is mandatory.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
• Dust inhalation may occur when closing and chang-
ing the dust collection bag. A failure to observe the
disposal notes in the operating instructions (e.g.
regarding the use of dust masks P2) may result in
dust inhalation.
• Risk to health due to noise. The permissible noise
level is exceeded during operations. It is essential
that personal protective equipment, such as hear-
ing protection, is worn.
• Hazard due to electrical power, with the use of im-
proper electrical connection cables.
• Furthermore, despite all precautions having been
met, some non-obvious residual risks may still re-
main.
• Residual risks can be minimised if the "safety in-
structions" and the "Proper use" are observed
along with the whole of the operating instructions.
Ensure careful storage of the safety instructions.

6. Technical data

Suction port, connection Ø
Hose length
Air power
Pressure difference
Filter surface
Container volume
Weight
Electric motor
Rated input
Motor speed
Technical changes reserved!
Noise and vibration
m Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB (A),
please wear suitable hearing protection.

7. Unpacking

• Open the packaging and carefully remove the de-
vice.
• Remove the packaging material, as well as the
packaging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
• If possible, keep the packaging until the expiry of
the warranty period.
• Familiarise yourself with the product by means of
the operating instructions before using for the first
time.
100 mm
2000 mm
130 m³/h
2200 Pa
0.2 m²
65 l
5 kg
1100 W
35000 min
-1
GB | 17