Usage Examples; Installation On Stand; Installation On Subwoofer; Installation On Subwoofer With Pole - dB Technologies KL-Serie Bedienungsanleitung

3. USAGE EXAMPLES

• Types of installation other than those here described are not allowed.
• Never use the handles to suspend the speaker
• Always check that the positioning is stable and that the installation does not pose a danger to
people, animals or property.
• Perform the installation on a flat, not tilted surface, otherwise an additional safety fastening is
mandatory.

INSTALLATION ON STAND

1 KL speaker can be installed on a tripod stand, coming as standard option
(accessory SSB2) with a 35 mm diameter pole. The maximum allowed height
between the speaker base and the floor is 150 cm for KL10, KL12. KL15.
ATTENTION!
• Use a suitably sized stand with the central leg pointing forward
to provide appropriate stability.

INSTALLATION ON SUBWOOFER

Through the installation with the DS2-S accessory, it is possible to use 1 KL directly
on subwoofer provided with M20 flange. For further information, refer to the
relevant accessory manual.

INSTALLATION ON SUBWOOFER WITH POLE

It is possible to use only one speaker mounted on a 35 mm diameter pole. The
maximum allowed height between the speaker base and the floor is 150 cm for
KL10, KL12, KL15. In case of DVA S08DP or SUB 28D subwoofer, an additional
mechanical fastening or a belt fastening is required to correctly and safely fix the
installation.
KL SERIES
32
English
Code 420120347 REV. 1.0